StoneSky Tactical Flip Up Dot Sight Holographic Reflex Scope Foldable Red Dot Sight RMR

***Warmly Note***

The Red dot scope is only suitable on GLOCK MOS and slides that have been machined to accept RMR micro dot sights

If it is any other model, it needs to be paired with a universal base.

We have 3 type mount,This is the order listing:

Description：

Color: Bk / DE / RD / GN / GY

Folding Red dot reflex lens (22mm X 16mm)

Folds down flat when not in use.

With a push of a button the FlipDot lens flips up and automatically turns on.

Objective lens diameter: 22mm X 16mm

Magnification: 1X

Reticle: red dot

Dot size: 3 MOA

Length: 2.0 in

Width: 1.2 in

Height: 1.1 in

Weight: 1.0 oz (without plate)

Battery: 1*CR2032 battery(not  included)

MOUNTS:

Fits on GLOCK MOS and slides that have been machined to accept RMR micro dot sights

POWER ON:

Flip up lens system deploys to the ON position with a push of a button

POWER OFF:

Turn off the optic by simply folding the lens down until it locks into place

Universal Base

Description about Universal Mount:

- Universal optics mount for most proliferated sites in the field
- Super low-profile
- Ability to use an optic without cutting your slide.
- Sleek solid steel construction
- The mount itself is secured to the slide via the dovetail with 6 set screws.
 
Product Spec:
Fits all Models Except 42/43
Length:1 7/8” 
Width: 1 1/8”
Height: 1/8”
Weight: 1.3 oz (with mounting hardware)
Materials: aluminum
Color: black

 
Notice: the pins for the RMR red dot only fit for the original RMR. But it can also install well on the replica RMR only with the screws

.But the glock mount is not fit all Glock gun.If your gun has trapezoidal slot,this glock mount do not fit for your gun.You need one Universal Mount .

Product installation:
- Depending on what optic you have you will need to find the screws that correlates with your particular optic. There are two special screws for Triji-con RMR. Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM. 
- It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation.
- Leupold Delta Point* can be mounted but not with reinforced posts to secure 100%
UPDATE: We have confirmed compatibility with Vor-tex Ve-nom Red Dot sights

Taurus PT111 G2, Millennium G2, G2, G2c, G2s, and original G3, or TX22 pistols Mount

Features:
1.This is the optic mount for the PT111 G2, Millennium G2, G2, G2c, G2s, and original G3, or TX22 pistols.
2. Made from stainless steel and then hard anodized for longevity and scratch resistance.
3. Designed to replace your rear sight, no milling of the slide required.

4. Will work for with the following sight:RMR, VISM, MROS, JPoint, Shield Sight Reflex Mini Sight, Vortex Viper, Vortex Venom, ADE RD3 003, ADE RD3-006A, ADE RD3-006B, Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III, Docter/Noblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 1×25, Vector Optics SCRD-19II Frenzy 1x17x24, or Vomz Pilad 1×20 optics

Material: Stain Steel
• size: 48.8 * 28.7mm / 1.92*1.13inch

CZ 75B 85B 97B P-07 P-09 Mount

NOTE :  Fit for : CZ 75B 85B 97B P-07 P-09
(Any red dot sight is not included)

Please refer to the base data(Mount interface size )

Mount interface size :
Width: 8.6mm/0.339 inch , 9.8mm/0.386 inch
Depth: 2.8mm/0.11 inch

Fit for red dot sight: Trijicon RMR /SRO, Vortex VENOM, Eotech MROS, Doctor Sight II Plus, Leupold DELTAPOINT, Burris Fastfire II&III